The Best Way To Set Up A Ceiling Fan Virtually All By Yourself

Do you own room that may utilize a ceiling fan? The installation of a ceiling fan is as straightforward as changing your current light fixture. Considering that a ceiling fan must have the same cabling as your light fixture, the only primary thing that really needs to be done is to change the work-box that can take on the weight of the ceiling fan. It can be very deadly if you do not exchange your current work-box to something that can take on the extra weight of the ceiling fan. Before you get started with your project, go through the directions for the fan you have selected, and be sure that you have all of the necessary tools.

Should you decide to make the fan on the cathedral ceiling, you must get an extension so the fan wont be so high up. As soon as you have all the stuff prepared, the foremost thing you must do is make sure that the breaker is off so no power goes to the light fixture. After taking off the current light fixture, verify to see if the installed work-box can manage the weight of your ceiling fan. On most occasions, the work-box will never be able to take on the extra weight so you may need even more support. Incorporating support to the work-box is not that tough if you have entry to the light fixture from the attic.

To help extra support, you nail a 2×4 inside the ceiling rafters where it hits the top of the work-box. The moment the 2×4 is properly anchored, attach the work-box to the 2×4. If you did it accurately, the body weight of the fan must be efficiently supported by the 2×4 wood and screws. In cases where you are incapable to do it from the attic room or you have basically no attic, you will want to add a cross bracing in your ceiling. Carrying out this is far more of a challenge and may not be as safe as using a 2×4 but it is the most suitable you can do if you don’t get access to the attic.

So now, after setting up the fan based on the instructions, you are set to put your new fan. The tough part is joining the wiring while keeping the fan. The challenge is according to the kind of fan you have, whether it is a draping frame or a fan that has a bracket with a J hook. For the majority of fans the wall switch will turn it on or off, as the chain will handle the speeds. If you prefer a light kit together with your fan, they can be monitored by either chain or wall switch.

Electrical wiring the fan is as easy as connecting two black wires, two ground wires and a couple white wires. Once you have accomplished building the fan and cabling, the last step is to secure the fan blades. Immediately after you install the blades, the only thing left is to flip the breaker back on to find out if you did it right.